Our key focus areas
Services
The company
Pre-fabricated frame buildings
Buildings with a load-bearing frame made of frames with tightening produced by ENERGY are single- and multi-span non-residential buildings and structures for various purposes of 1-3 levels of responsibility according to GOST 27751-2014
Advantages
Span m
The span of a prefabricated steel building of the EXERGY type can range from 12 m to 30 m
12-30
Span m
The span of a prefabricated steel building of the EXERGY type can range from 12 m to 30 m
12-30
Wall height
The wall height of a prefabricated steel building of the EXERGY type can be up to 8 m
8
Wall height
The wall height of a prefabricated steel building of the EXERGY type can be up to 8 m
8
Installation of m
The pace of installation works is up to 90-180 m2 per shift
180
Installation of m
180
The pace of installation works is up to 90-180 m2 per shift
Temperature
From -55 oS to +50 oS with non-aggressive, mildly aggressive or medium aggressive environmental effects
Temperature
From -55 oS to +50 oS with non-aggressive, mildly aggressive or medium aggressive environmental effects
length m2
The maximum length of the building without a temperature seam device is 250 m.
250
length m2
The maximum length of the building without a temperature seam device is 250 m.
250
The structural scheme of the building
All structures of EXERGY frame buildings are made of bent galvanized profiles
C-shaped and Σ-shaped sections, 150-400 mm high, 0.8 to 4.0 mm thick.
C-shaped and Σ-shaped sections, 150-400 mm high, 0.8 to 4.0 mm thick.
The connection of columns, beams, girders and ties is bolted using shaped elements. Tightening at the ceiling level ensures geometric immutability and reduces roof deformations. The patented tightening design ensures reliability and ease of operation of the building — there is no need to maintain tensioning devices, because in this design, pre-tension in the tightening is created during installation.
Characteristics of the objects
Buildings with a load-bearing frame made of frames with tightening produced by ENERGY are single- and multi-span non-residential buildings and structures for various purposes of 1-3 levels of responsibility according to GOST 27751-2014
Temperature operation from -55°C to +50°C with non-aggressive, mildly aggressive or medium-aggressive environmental effects, seismicity up to 5 points, in 1-5 snow areas and 1-5 wind pressure areas according to SP 20.13330.2016
The frames are arranged in a space with a certain pitch (3, 4, 5 m), combining with each other by horizontal connections and girders, and vertical and horizontal connections (along columns and along the coating) are used to give the building frame geometric immutability.
All structures of EXERGY frame buildings are made of bent galvanized profiles of C-shaped and Σ-shaped cross-section, 150-400 mm high, 0.8 to 4.0 mm thick.
The connection of columns, beams, girders and ties is bolted using shaped elements. Tightening at the ceiling level ensures geometric immutability and reduces roof deformations.
The project may provide for the installation of a point lifting mechanism.
Type of profile used Cross section
Type of profile used Cross section
The patented tightening design ensures reliability and ease of operation of the building — there is no need to maintain tensioning devices, because in this design, pre-tension in the tightening is created during installation.Type of profile used Cross section
Get a preliminary calculation for your facility right now
Fill out the form and the EXERGY specialist will offer the best solutions for your tasks
Completed buildings
Contacts
Contact us in any convenient way or fill out the form and we will call you back to discuss the details
Russia, Lipetsk region, Kuleshovskaya industrial zone, Orlovskaya str., vl. 47
Russia, Lipetsk region, Kuleshovskaya industrial zone, Orlovskaya str., vl. 47
